| 1. | Experimental study on new combined steel - lead damper
新型钢铅组合耗能器试验研究 |
| 2. | Therefore , the technology combining steel fiber with expensive agent is appropriate to the plastic shrinkage and cracking of concretes
因此，采用膨胀剂与钢纤维的复合技术是防止混凝土发生塑性收缩开裂的比较理想的技术措施。 |
| 3. | This thesis brought forward a new composite structure , which combined steel sheet and concrete with additional shaped steel in the direction of wave under steel sheet
本文通过在压型钢板下沿着波纹方向增设型钢梁，组成型钢和压型钢板与混凝土组合板。 |
| 4. | The engineering practice proved that installation of caz combined steel sheet piles by driving with hammers is rational and feasible and the cost of driving is also effectively controlled
实践证明锤击法施工caz组合桩，其施工工艺是合理可行的，其打桩成本也得到了有效控制。 |
| 5. | Combined steel structure design . it will be designed and set adopting overgroundor underground , inside or outside , closed or unclosed , single or multi - machines
组合式钢结构设计，可依据场地不同，采取地上或地下、室内或室外、封闭或开放、单机或多机并列布置。车位数量、设备型式可根据用户要求进行定做。 |
| 6. | Secondly , from the ways of vertical resistant structural systems , floor structure systems , preserving systems , craftwork systems , and so on , this paper further analyses the appropriate steel structural technologies for tall buildings in above ways , and puts forward the strategies on how to combine steel structural technologies with tall building ' s plan forms , spaces , shape , details and so on
论文进一步对钢结构体系高层建筑适宜技术涉及到的竖向结构系统、楼盖系统、防护技术、材料技术以及工艺技术等具体内容作了分析研究，并归纳出了钢结构高层建筑各系统相应的适宜技术；提出了结合适宜技术的钢结构体系高层建筑平面模式、建筑空间形式与利用、艺术造型与表现、细部技术与艺术处理等设计策略。 |
| 7. | In the construction of the tanghe inverted siphon on mid - roule of south - to - north water transfer project , some reliable construction processes and techniques are applied such as belt conveyor with three - rail gantry , construction with combined steel formwork , straight screw sleeve connection for reinforcement and the crushed stone - planting method etc . , by which better construction effects are obtained
摘要南水北调中线唐河倒虹吸工程项目施工中，根据工程特点，采用了三轨门架式皮带布料机、钢模板联体施工、钢筋滚压直螺纹套筒连接、混凝土施工缝栽石法等可靠的施工技术和施工工艺，取得了较好的效果。 |
| 8. | In staged construction process , study is primarily aimed at the truss load resistance capacity and flexural performance under construction and design load , combination performances of steel trusses in conjunction with concrete beam , the vertical displacement difference of two steel trusses with different span and their lateral stability , the glide displacement of the steel truss end during construction , the load resistance performance of steel trusses and concrete structure at the designed load , and the extreme limit loads and the breaking appearance of the combined steel trusses
主要研究了在阶段施工过程中，钢桁架在施工荷载及设计荷载下的受力性能和变形能力；钢桁架与混凝土梁板的共同工作性能；两榀不等跨钢桁架在整体受力下的竖向位移差及其对结构的作用和侧向稳定性；钢桁架端部在施工阶段的滑动情况；使用阶段钢桁架及其端部混凝土结构的受力性能；组合钢桁架结构的极限承载力和破坏形态。 |
| 9. | Based on the comparison of the construction technologies employed in building docks no . 1 and no . 2 on alignment no . 1 in changxing shipbuilding base of china shipbuilding company , the problems encountered in the construction and the measures to solve the problems are described in the paper and the use of combined steel sheet piles in construction of docks is expounded
摘要通过对中船长兴造船基地1号线1号、 2号船坞工程中施工工艺的比较，介绍了在施工中遇到问题及解决措施，阐述了组合钢板桩在船坞施工中的应用。 |
| 10. | By adopting static and dynamic analysis methods , economic and technical evaluations of common concrete road , fiber - reinforced concrete and compound road by combining steel fibers with common concrete are put forward . this conclusion is drawed that compound road by combining steel fibers with common concrete are put forward is better than other roads
论文利用静态和动态的分析方法，对沥青路面、普通水泥混凝土路面、钢纤维混凝土路面以及钢纤维与普通混凝土复合路面进行经济分析比较，得出了复合式路面比其它几种路面更为经济、合理的结论。 |
